PSSO Amp Set MK2 for Line-Array M
2.865,99 €
Tasse escluse
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
PSSO Amp Set MK2 for Line-Array M
Audio - Boxensysteme - Line Array
Peso: 0.0
Codice: 11041069 codice Ean: MARCA: PSSO
10451685 PSSO DDA-2500 Amplifier
Stereo PA amplifier with SMPS, 2 x 1250 W / 4 ohms
- Stereo PA amplifier with class D circuitry
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts)
- Limiter and speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 2 calibrated level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs and screw terminals
- Rugged steel chassis with aluminum front panel
- Air flow from front to rear
- The device is cooled by 2x temperature-controlled fan
- (19") 48.3 cm rack installation 2 U
10451695 PSSO QDA-4400 4-Channel Amplifier
PA amplifier with SMPS, 4 x 1100 W / 4 ohms, 4 x 650 W / 8 ohms
- 4-channel PA amplifier with class D circuitry
- 4 x 1100 W/4 ohms
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 4 level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Complete protection set
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- Rugged steel chassis with aluminum front panel
- Air flow from front to rear
- The device is cooled by 2x temperature-controlled fan
- (19") 48.3 cm rack installation 2 U
10451696 PSSO QCA-6400 4-Channel SMPS Amplifier
PA amplifier with SMPS, 4 x 1600 W / 2 ohms, 4 x 1400 W / 4 ohms
- 4-channel PA amplifier with class I circuitry
- 4 x 1400 W/4 ohms
- Low weight and height due to integrated switch mode power supply
- Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
- Speaker switch-on delay
- 3 operating modes can be selected (stereo, parallel or bridged)
- 4 level controls for precise level adjustment
- Input sensitivity adjustable
- LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
- Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
- Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
- Speaker outputs via lockable Speaker plugs
- Rugged steel chassis with aluminum front panel
- Rack installation with 2 units
- Neutrik Speakon outputs
- Air flow from front to rear
- The device is cooled by 2x temperature-controlled fan
- (19") 48.3 cm rack installation 2 U
10356362 PSSO DXO-26 PRO Digital Controller
Digital speaker management system with real-time network communication, 2 inputs and 6 outputs
- Digital network speaker management system with 64-bit processing
- Premium components ensure excellent sound-features
- Flexible routing configurations for all standard mono and stereo output operating modes
- 2 analog inputs and 1digital AES/EBU interface (XLR)
- 6 analog outputs (XLR)
- 10-band parametric EQ per input and output
- Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
- Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
- The intelligent software for PC and Mac allows convenient control with a computer
- Full configuration and real-time network communication via the built-in Ethernet interface
- Presets are easy to store, transfer and manage
- Up to 80 user presets storable in the device via software
- Control of all functions also possible via the controls at the front panel
- Alphanumeric LCD screen with 2 lines of 16 characters each
- Input sensitivity digitally adjustable
- Inputs and outputs with 4-digit VU meter
- Mute switch with LED indicator per output
- Up to 2000 ms signal delay adjustable for the inputs and outputs
- Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
- Switchable phase (180°)
- Lock function for protecting the program settings
- Rack installation, 1 U
- Windows XP, Vista, 7, 8, 10 and Mac OS X 10.5.8 and better
- Control your speaker systems more flexible than ever with the DXO Control app
- DXO Control for iPad supports all functions of the PC software and is available for free from the app store
- Digital signal processor
- The device can be connected via USB to the PC in connection with DXO Software; The device can be connected via RJ45 (F) mounting version to the PC in connection with DXO Software
The firmware can be updated via the PC connection - (19") 48.3 cm rack installation 1 U
30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
U-front panel in different sizes
- 1 mm steel, black, powder-coated
- Weight 465-1350 g (depending on the version)
- 1 U
30109192 ROADINGER Rack Profi KM 8U 55cm with wheels
PRO flightcase for 483 mm units (19")
- Profile rails with mounting facility for 483 mm units (19"), e.g. light PA amplifiers, power packs, additional equipment
- Stomped profile rails for cage nuts
- 2 removable covers (double-door version)
- High-quality workmanship with 9 mm multiplex birch wood, dark brown laminated
- Aluminum profile frames (30 mm) with rounded edges
- Three-leg, medium-sized steel ball corners
- 4 x recessed case handles with mounting dish and backing ring
- 4 butterfly lock
- 4 wheels with 2 brakes
- 4 x chrome case handles
- Available in different height units (1 U = 44 mm)
- Transport aid: With wheels
- 8 U
- Made in Europe
| Weight: | 54.90 kg |
| 10451685 PSSO DDA-2500 Amplifier | |
| Power supply: | 100-240 V AC, 50/60 Hz |
| Power consumption: | 200 W 1/8 power |
| Output power: | 2 x 700 W RMS (8 ohms) 2 x 1250 W RMS (4 ohms) |
| Frequency range: | 20 - 20000 Hz |
| S/N ratio: | >100 dB |
| THD: | <0.15 % at 1 kHz |
| Power connection: | Mains input P-Con (blue), mounting version Power supply cord with safety plug (provided) |
| Cooling: | 2 x temperature-controlled fan , Air flow from front to rear |
| Impedance: | Input 10 kOhm , unbal. Input 20 kOhm , bal. |
| Gain: | 39.7 dB |
| Circuitry: | Class D |
| Slew rate: | >10 V/µs |
| Damping factor: | >500 |
| Control elements: | Power switch, level control per channel, mode switch (stereo/parallel/bridged), limiter selector, Input sensitivity switch |
| Controls: | Softstart; overheat; overload; short-circuit; limiter; VHF; DC voltage; progressive volume |
| Status LED: | Power, level meter, clip, protect |
| Connections: | Input: 2 x line via 3-pin XLR Output: 2 x line via 3-pin XLR Output: 2 x speakers via speaker built-in socket (f) |
| Input sensitivity: | 0.775 V; 1.0 V; 1.81 V , switchable; 32 dB; 37 dB; 39.3 dB , switchable |
| Housing design: | (19") 48.3 cm rack installation 2 U |
| Dimension: | Width: 48.3 cm Depth: 30.7 cm Height: 8.9 cm |
| Weight: | 6.25 kg |
| 10451695 PSSO QDA-4400 4-Channel Amplifier | |
| Power supply: | 100-240 V AC, 50/60 Hz |
| Power consumption: | 830 W 1/8 power |
| Output power: | 4 x 650 W RMS (8 ohms) 4 x 1100 W RMS (4 ohms) 2 x 2000 W RMS bridged (8 ohms) |
| Frequency range: | 20 - 20000 Hz |
| S/N ratio: | >100 dB |
| THD: | <0.1 % at 1 kHz |
| Power connection: | Mains input P-Con (blue), mounting version Power supply cord with safety plug (provided) |
| Cooling: | 2 x temperature-controlled fan , Air flow from front to rear |
| Impedance: | Input 20 kOhm , bal. Input 10 kOhm , unbal. |
| Gain: | 39.9 dB |
| Circuitry: | Class D |
| Slew rate: | >10 V/µs |
| Damping factor: | >500 |
| Crosstalk: | >65 dB |
| Control elements: | Power switch, mode switch (stereo/parallel/bridged), level control per channel, Input sensitivity switch |
| Controls: | Softstart; overheat; overload; short-circuit; progressive volume; VHF; limiter |
| Status LED: | Power, level meter, clip, protect |
| Connections: | Input: 4 x line via 5-pin XLR Output: 4 x line via 5-pin XLR Output: 4 x speakers via speaker built-in socket (f) |
| Input sensitivity: | 0.775 V; 1.0 V; 1.81 V , switchable; 32 dB; 37 dB; 39.3 dB , switchable |
| Housing design: | (19") 48.3 cm rack installation 2 U |
| Dimension: | Width: 48.3 cm Depth: 46.1 cm Height: 8.9 cm |
| Weight: | 9.50 kg |
| 10451696 PSSO QCA-6400 4-Channel SMPS Amplifier | |
| Power supply: | 230 V AC, 50 Hz |
| Power consumption: | 820 W 1/8 power |
| Output power: | 4 x 1600 W RMS (2 ohms) 4 x 1400 W RMS (4 ohms) 4 x 800 W RMS (8 ohms) 2 x 3200 W RMS bridged (4 ohms) 2 x 2800 W RMS bridged (8 ohms) |
| Frequency range: | 20 - 20000 Hz |
| S/N ratio: | >80 dB |
| THD: | <0.05 % at 1 kHz |
| Power connection: | Fixed Power supply cord with safety plug |
| Cooling: | 2 x temperature-controlled fan , Air flow from front to rear |
| Impedance: | Input 20 kOhm , bal. Input 10 kOhm , unbal. |
| Gain: | 40.3 dB/ 0.775 V 38 dB/ 1.0 V 35.1 dB/ 1.4 V |
| Circuitry: | Class I |
| Slew rate: | >10 V/µs |
| Damping factor: | >800 |
| Crosstalk: | >65 dB |
| Control elements: | Power switch, level control per channel, mode switch (stereo/parallel/bridged), Input sensitivity switch |
| Controls: | Overheat; overload; short-circuit; DC voltage; softstart; VHF |
| Status LED: | Power, level meter, clip, protect |
| Connections: | Input: 4 x line via 3-pin XLR Link: 4 x line via 3-pin XLR Output: 4 x speakers via speaker built-in socket (f) |
| Input sensitivity: | 0.775 V; 1.0 V; 1.4 V , switchable; 26 dB; 32 dB; 38 dB , switchable |
| Housing design: | (19") 48.3 cm rack installation 2 U |
| Dimension: | Width: 48.3 cm Depth: 44.5 cm Height: 8.9 cm |
| Weight: | 13.45 kg |
| 10356362 PSSO DXO-26 PRO Digital Controller | |
| Power supply: | 100-240 V AC, 50/60 Hz |
| Power consumption: | 10.00 W |
| Frequency range: | 10 - 40000 Hz |
| THD: | <0.005 % at 1 kHz |
| Network connection: | Protocol: ethernet TCP/IP via 1x RJ45 (F) mounting version |
| DSP: | Digital signal processor |
| Power connection: | Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided) |
| Crossover frequency: | 20-20000 Hz |
| Impedance: | Input 10 kOhm Input XLR (AES/EBU): 110 Ohm Output 50 Ohm |
| Gain: | Input: -50 dB to +12 dB Output: -50 dB to +12 dB |
| Filter: | Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct |
| Delay: | 0 - 2000 ms |
| Dynamic range: | Input: 118 dB Output: 114 dB |
| Sample rate: | 65 kHz |
| Connections: | Input: 2 x line via 3-pin XLR Output: 6 x line via 3-pin XLR |
| Max. level: | Input: +22 dBu Output: +12 dBu |
| USB port: | Typ B |
| PC connect: | DXO Software via USB; DXO Software via RJ45 (F) mounting version, firmware can be updated |
| Housing design: | (19") 48.3 cm rack installation 1 U |
| Dimension: | Width: 48.3 cm Depth: 22.3 cm Height: 4.45 cm |
| Weight: | 2.30 kg |
| 30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U | |
| Diameter mounting holes: | 7 mm |
| Material thickness: | 1 mm |
| Mounting height: | Approx. 4.45 mm (1 U) |
| Housing design: | 1 U |
| Dimension: | Width: 48.3 cm Height: 4.45 cm |
| Weight: | 0.30 kg |
| 30109192 ROADINGER Rack Profi KM 8U 55cm with wheels | |
| Maximum load: | 100 kg |
| Material: | Birch multiplex, 9 mm |
| Color: | Black, laminated |
| Outer dimensions/corners approx.: | 65 mm |
| Mounting width: | 483 mm (ca. 19") |
| Mounting height: | Approx. 360 mm (8 U) |
| Mounting depth: | 550 mm |
| Housing design: | 8 U |
| Dimension: | Width: 53 cm Depth: 71 cm Height: 52 cm |
| Weight: | 23.10 kg |
Audio - Boxensysteme - Line Array
Peso: 0.0
Commenti (0)
Ancora nessuna recensione da parte degli utenti.
4 altri prodotti della stessa categoria:
Prodotti visti
