The LED D-2000 Beam Effect by Eurolite comes equipped with 5 high-performance 10-watt LEDs in the colors red, green, blue, amber and white creating dynamic strobe and derby effects. The LED D-2000 works with 3 preset programs. In the automatic mode, the preset light programs are played fully automatically without any further adjustments on your part. Alternatively, you can choose the sound-controlled mode via the built-in microphone with adjustable sensitivity. You can also operate multiple devices in sync using the master/slave mode. Apart from the preset programs, the LED D-2000 can also be controlled via 5 or 9 DMX channels. For the addressing and settings (such as the color selection for 15 mixed colors, color changes, fade effects or dimmer effects) you can either use the 4-digit LED display and operating buttons on the rear of the device or the supplied IR remote control. What is more, the LED D-2000 is compatible with QuickDMX, the wireless DMX system by Eurolite. A phantom-powered USB port for a wireless transmission of the DMX signal through a QuickDMX receiver can be found on the rear of the device.
Extremely bright Derby with 5 x 10 W LED in R,G,B,A,W
Absolute eyecatcher
5 x 10 W LED in the color red, green, blue, amber and white for dynamic strobe and derby effects
Direct color selection for 15 preset colors
DMX control via every standard DMX controller
3 built-in auto and music show programs
The colorful beams change their direction of movement at every bass-beat in sound controlled mode
Addressing and setting via control panel with 4-digit LED display
Supports QuickDMX - the wireless DMX system from Eurolite
Built-in phantom-powered USB port for QuickDMX receivers (accessories)
Convenient wireless control via included IR remote control EUROLITE IR-7
Function: static color, auto mode, interne programs, color change, color fade, dimmer and strobe effect
Locking possibility at the mounting bracket
IEC terminals for power linking up to 8 units
Switch-mode power supply for operation between 100 and 240 volts
LED: 5 x high-power 10 W RGBWA
Can be operated in 5; 9 CH mode
The device is cooled by cooling fan
Controlling by Stand-alone; DMX; QuickDMX via USB (optional); Sound to light via Microphone; IR remote control included; Master/slave function
Is in Light J Software; EUROLITE LED PC-Control 512 software; EASY SHOW already preprogrammed
Power supply:
100-240 V AC, 50/60 Hz
Power consumption:
60 W
LED:
5 x high-power 10 W RGBWA
Flash rate:
0 - 20 Hz
DMX channels:
5; 9
DMX input:
3-pin XLR (M) mounting version
DMX output:
3-pin XLR (F) mounting version
Cooling:
Cooling fan
Control:
Stand-alone; DMX; QuickDMX via USB (optional); Sound to light via Microphone; IR remote control included; Master/slave function; Light J Software; EUROLITE LED PC-Control 512 software; EASY SHOW